Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

Computer Hardware Course – The Advantages of Taking It

Computer hardware courses are an excellent way to learn how to manage the inevitable computer failures that you will encounter as you find yourself hanging on your computer more and more everyday. While you do have the option of taking your computer to the service center it can cost you a lot of time and money. Your computer hardware course is invaluable for helping you understand the hardware requirements for your computer that will be enable you to jump to the rescue instead of trudging along to the repair shop.

It does not take an engineer or a technician to be successful in learning about computer hardware. If you are interested in engineering or technician positions however, a background in computer hardware can make you a far more valuable person in your field and can enhance your employability tremendously.

To troubleshoot your computer you can do very well with a simple computer hardware course. You can become your own specialist and forgo spending the money on an IT specialist.

The time invested in a computer hardware study program will pay off quickly when things go wrong. But, this is not the only reason taking a computer hardware course would be a good plan.

Not only will you be able to fix your computer, but you will have the knowledge to build a computer from scratch. The cost of computer parts is often far less expensive than buying a pre-made package. You will also be able to customize your computer so that it is perfectly designed for your needs.

By avoiding the cost of labor from the computer store you will have a far less expensive computer that is perfect for you. You will also no longer need to worry about taking your computer in for repairs as you will know just how to fix what goes wrong.

Computer knowledge is in high demand no matter what career you are involved in. With the information you learn in a computer hardware course you will be able to take on an IT position. Such positions are in high demand as a limited number of people have the knowledge to take on an IT role.

The time needed to take a computer hardware course is well worth the investment. Learning about software and programming can only make you even better with your computer goals. If you are limited in time, not to worry. Many courses are available online or on CD for you to do at home.

Take some time to discover exactly what will be covered in your course. The computer technology field is huge, so you will need to focus. You will never be able to learn everything about computer hardware in a single course. It takes a lifetime of study to learn, and with technology constantly changing you will need to continuously work on keeping your knowledge up to date. A computer hardware course will bring you a chance to get ahead of the game and keep up with your own computer.

Louis Zhang, computerhardwarecute dot com

Posted in general | Comments Off on Computer Hardware Course – The Advantages of Taking It

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

Computer Engineer Salary

A report by CNNmoney states that students who majored in computer engineering were the top earners of the class of 2011. On top of that according to the Bureau of Labor Statistics, the demand for computer software engineers is expected to grow by nearly 38% by 2016 You may have just stumbled upon your new career!

There are two types of engineers, hardware and software. A hardware engineer deals with physical components. They research, design, and test the physical components of a computer including circuit boards, chips, and keyboards. A software engineer, called developers, create programs for users to perform task. They create the software that translates the commands from applications into instructions that the hardware can understand. They create the operating systems and computer interfaces for desks and consumer electronics.

95% of jobs are located in metropolitan areas. Positions are located in research labs and manufacturing labs. Some work in computer system design firms, research and develop firms, or federal government. Just as there is a range of potential work environments you may end up being in, there are also a large variety of things you may be creating programs for. Computer engineers create on computers, cell phones, navigational systems in your car, video games, and etc. If you're creative, love computers, and do not mind making a lot of money in the process then this just might be for you!

Some of the highest income makers coming directly out of college are graduates in the computer engineering field. This is a great incentive to buckled down and stay focused on those late nights studying in your dorm. This will literally pay off .. BIG TIME! The average salary for computer engineer job postings nationwide are 29% higher than average salaries for all jobs nationwide. Sound good yet? Let's get into the specifics.

The overall computer engineer salary is $ 87,000. To be even more specific let's discuss what you can expect if you enter involved in hardware or software. Starting with the low end of what you can expect. As a software engineer the lowest 10% average $ 45.44 / hr or $ 57,810 annually. The highest 10% average $ 65.28 or $ 135,780. As a hardware engineer the percentages or a slight bit higher. A hardware computer engineer salary on the low end can on average expect $ 48.73 / hr or $ 62,400. The highest 10% of hardware engineers make $ 70.07 / hr or $ 147,610. Not a bad day's work!

Posted in general | Comments Off on Computer Engineer Salary

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

Five Reasons to Study Forensic Accounting

Forensic accounting is the practice of utilizing accounting auditing and investigative skills to assist in legal matters to obtain an accurate result to establish the accountability for administrative proceeding. You may be wondering, why study forensic accounting?

Well, here are the five reasons:

  • Our current economic crisis has left many companies to face serious financial issues that may lead to bankruptcy. Hence, these companies have been forced to stoop down to the lowest level to save their company by committing frauds and swindles. This makes such a job an important one that increases in demand each year.
  • Internal audit in the company could not throw light on the different fact and other hidden aspects of the corporate fraud. They are hardly in a position to initiate proper action at proper time due to their lack of forensic accounting skills.
  • Forensic accounting is a new and very exciting study. This change the perspective of the world on accounting study, which has been a theoretically dull field in itself.
  • If you are ambitious, fast, observant, creative and diligent, Forensic accounting is definitely a dream job and a great investment. Using computer technology, creative thinking, and careful inspection of financial records; the hidden proof of the crimes can be discovered.
  • You will always be equipped with the latest computer software and gadgets. Forensic accounting heavily relies on computer software and generalized audit software to aid in the detection and investigation of fraud and white-collar crimes. Also, investigative tools such as data mining, link analysis software and case management software and the use of the Internet are the essential skills as well.

In conclusion, forensic accounting has been stereotyped as a boring and uninteresting job which has been proved to be wrong. There are many reasons which show to be benefits when it comes to studying forensic accounting. Not only will you be rewarded with a stable job, you would also look forward to going to work everyday

Posted in general | Comments Off on Five Reasons to Study Forensic Accounting

Mortgage Loan Origination Software – 10 Functions of Mortgage Banking

Regardless of a mortgage lending organizations’ size, mortgage loan software, data security solutions and automation tools and services should be able to assist with mortgage loan automation requirements. In today’s chaotic mortgage lending environment origination and document security systems need to be easily configured to emphasize a company’s special needs and increase efficiencies across all aspects of the loan origination process, allowing lenders to increase quality and productivity.

Technology-driven automation is the key to succeeding in the increasingly complex, deeply scrutinized mortgage industry. Web-based (Software-as-a-Service), Enterprise mortgage software that supports the ten primary functions in mortgage banking will provide lenders with the necessary competitive advantages to succeed in today’s mortgage industry.

Ten Primary Functions in Mortgage Banking

  1. Mortgage Web site design, implementation, and hosting to provide product, service, loan status, and company information to mortgage customers and business partners
  2. Online loan applications for gathering information from borrowers and business partners that issue loan terms, disclosures, and underwriting conditions
  3. Loan origination software for managing loan data, borrower data, property data, general status reporting, and calculations
  4. Interface systems to send and receive data from real estate service providers, such as credit reports, flood determinations, automated underwriting, fraud detection, and closing documents
  5. Internal automated underwriting system that is simple enough for originators and sophisticated enough for underwriting portfolio loan products
  6. Document generation for applications, upfront disclosures, business processes, and closing documents
  7. Integrated imaging that is used from loan origination to investor delivery and for file archiving
  8. Interest rate and fee generation along with program qualification guidelines
  9. Secondary marketing data tools to track loan revenue and investor relationships, including warehouse line management and interim servicing to complete the back-office system
  10. Reporting such as loan delivery, year-end fee reporting, and HMDA reporting for loan application disposition

Web-Based, enterprise mortgage software that supports the ten primary functions of mortgage banking simplifies compliance, maximizes operational efficiencies, and increases profitability.

Posted in general | Comments Off on Mortgage Loan Origination Software – 10 Functions of Mortgage Banking

Clinic Management Software: Benefits of Clinic Software

Clinic management software is a web-based program which helps clinic owners manage their operations. It is already widely used in clinics in many regions of the world especially in the American continents, Europe, and Australia.

Here is a list of the many benefits of clinic management software.

1. It helps clinic owners simplify their business and helps them manage one clinic or a huge group of clinics.

2. It keeps and updates patients’ demographics like residence, gender, age, ethnicity, and diagnosis of patients.

3. It keeps and updates patients’ records like lungs chart, heart chart, kidney chart, weight and height charts, nutritional date, respiratory system chart and others.

4. It can print out prescriptions, patient records, billings, certificates, and others. It can also give information about patients’ prescription, medicine available, and the formulation of the medicine.

5. It completes receptions in an automated and systematized way.

6. It manages accounting needs and maintains the inventory.

7. It completes billing transactions.

8. It checks account balances.

5. It schedules multiple appointments.

6. It can send out multiple email reminders.

7. It allows patients to confirm appointment in real time with the use of a mobile phone or a computer.

8. It allows practitioners an easy and quick access to their schedule and patients’ record anytime.

9. It includes reporting tools which could quickly present, print out, or send out reports like patient visits, patients referred to other doctors, patients referred by other doctors, list of fee collection, and daily profit report.

10. It can multitask and designed for quick and easy usage which consequently lessens the stress of clinic owners and clinic employees.

11. It saves business owners a significant sum of money since clinic management software does not require expensive servers or IT support group.

12. It allows clinic owners maximize billable time and spend more time in taking care of their patients since almost all administrative procedures are supported by the software including the daily backing up of everyday reports.

13. It also allows clinic owners to spend more time in making their business grow.

14. Clinic management software general has security features like password facility to validate users, entry validation, data secrecy feature, and data access that is user defined.

Business establishments like clinics need to cope up with the fast advancement in technology nowadays. Otherwise, they will be left behind since most business enterprises are already using such software.

Posted in general | Comments Off on Clinic Management Software: Benefits of Clinic Software

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)